Syed Jahanzaib Personal Blog to Share Knowledge !

November 30, 2012

DMASOFTLAB Radius Manager: Install + Backup + Restore [Short Reference Guide]


Ubuntu

dmalogo

LAST UPDATED:  8th JANUARY , 2014

Note:

You can also use radius manager automated installation script to install RM 4.0.4 and 4.1.0

https://aacable.wordpress.com/2014/01/04/automated-installation-script-for-radius-manager-v-4-0-44-1-4-with-latest-patch/

▼▼▼

Following is a short reference guide for DMASOFTLAB Radius Manager on Ubuntu Distro

Part-  1)         Installation Of RM with some TIPS,
Part- 2)         Complete Backup for RM and RM DB,
Part- 3)         Restore RM Data to new Installation.

▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲

PERSONNEL NOTE:

Please be informed that you can get better installation instructions in details from DMASOFTLAB official manual. This guide is a extracted version of original manual with my custo modifications. Please consult with the original manual and DMA helpdesk for official support. I have no affiliation with the DMA, its just my personnel experience you are reading in this guide. It can be wrong, or might not be working as per your requirements. Just drop me an message or email for any correction or modification if required.

aacable [at] hotmail.com

Thank you
Syed Jahanzaib

▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲

.

.

▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲

Part-1 # Installation of Radius Manager 4.x on Ubuntu 10.4 [32/64 bit versions]

▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲

DMASOFTLAB Radius Manager 4.0 Short reference manual guide for UBUNTU 10.4  *** 32 /64 Bit Version

If you have 64bit OS, then you have to download compatible 64bits packages from the dmasoftlab download section, just note down the 32bit files in this guide, and download 64bit version of same package from the DMA page.

After you have installed Ubuntu, configure IP address and enable internet access on it.

Now open Terminal Window and issue the below command to install required Modules. but make sure you do update ubuntu  before doing any further process.

Create temp directory where you will download things


mkdir /temp
cd /temp
apt-get update
apt-get install mc wget rcconf make gcc mysql-server mysql-client libmysqlclient15-dev libperl-dev curl php5 php5-mysql php5-cli php5-curl php5-mcrypt php5-gd php5-snmp

### For 32bit Only, download following two items and install them
wget http://www.dmasoftlab.com/cont/download/libltdl3_1.5.24-1ubuntu1_i386.deb
wget http://www.dmasoftlab.com/cont/download/libltdl3-dev_1.5.24-1ubuntu1_i386.deb
dpkg -i libltdl3_1.5.24-1ubuntu1_i386.deb
dpkg -i libltdl3-dev_1.5.24-1ubuntu1_i386.deb

### For 64bit Only, download following two items and install them
wget http://www.dmasoftlab.com/cont/download/libltdl3_1.5.26-1ubuntu1_amd64.deb
wget http://www.dmasoftlab.com/cont/download/libltdl3-dev_1.5.26-1ubuntu1_amd64.deb
dpkg -i libltdl3_1.5.26-1ubuntu1_amd64.deb
dpkg -i libltdl3-dev_1.5.26-1ubuntu1_amd64.deb

IONCUBE Installation:

Now Download ioncube library

### For 32bit
wget http://www.dmasoftlab.com/cont/download/ioncube_loaders_lin_x86.tar.gz

### For 64bit
wget http://www.dmasoftlab.com/cont/download/ioncube_loaders_lin_x86-64.tar.gz

Untar it in any temp folder for example /temp/ioncube

### For 32bit
tar zxvf ioncube_loaders_lin_x86.tar.gz

### For 64bit
tar zxvf ioncube_loaders_lin_x86-64.tar.gz

Create new folder for ioncube in usr/local

mkdir /usr/local/ioncube

and copy the whole folder in /usr/local

cd /temp/ioncube
cp * /usr/local/ioncube/

Now Add the appropriate ionCube loader to your php.ini

e.g: in following files.

echo "zend_extension=/usr/local/ioncube/ioncube_loader_lin_5.3.so" >> /etc/php5/apache2/php.ini
echo "zend_extension=/usr/local/ioncube/ioncube_loader_lin_5.3.so" >> /etc/php5/cli/php.ini

.

.

.

Installation procedure of FreeRadius

cd /temp

wget http://www.dmasoftlab.com/cont/download/freeradius-server-2.2.0-dma-patch-2.tar.gz
tar zxvf freeradius-server-2.2.0-dma-patch-2.tar.gz

cd freeradius-server-2.2.0/

### Now proceed with the compilation of FREERAIDUS , applicable for all
./configure
make
make install

ldconfig

Now test RADIUS by issuing following command:


radiusd -X

You will see something like below . . .

radius-ready
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

TIP: After issuing make command , if you see errors like below

gcc -o .libs/radeapclient .libs/radeapclient.o libeap/.libs/libfreeradius-eap.so -lnsl -lresolv -lpthread
/usr/bin/ld: .libs/radeapclient.o: undefined reference to symbol ‘fr_perror’
/usr/bin/ld: note: ‘fr_perror’ is defined in DSO /root/freeradius-server-2.1.8/src/lib/.libs/libfreeradius-radius-2.1.8.so so try adding it to the linker command line
/root/freeradius-server-2.1.8/src/lib/.libs/libfreeradius-radius-2.1.8.so: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[6]: *** [radeapclient] Error 1
make[6]: Leaving directory `/root/freeradius-server-2.1.8/src/modules/rlm_eap’
make[5]: *** [common] Error 2
make[5]: Leaving directory `/root/freeradius-server-2.1.8/src/modules’
make[4]: *** [all] Error 2
make[4]: Leaving directory `/root/freeradius-server-2.1.8/src/modules’
make[3]: *** [common] Error 2
make[3]: Leaving directory `/root/freeradius-server-2.1.8/src’
make[2]: *** [all] Error 2
make[2]: Leaving directory `/root/freeradius-server-2.1.8/src’
make[1]: *** [common] Error 2
make[1]: Leaving directory `/root/freeradius-server-2.1.8′
make: *** [all] Error 2

To solve this this problem,Add followign directive

-lfreeradius-radius-2.1.8

in freeradius-server-2.1.8/src/modules/rlm_eap/Makefile .
Open it in nano/vi or any text editor by,

nano freeradius-server-2.1.8/src/modules/rlm_eap/Makefile

Before editing

    $(LIBTOOL) –mode=link $(CC) $(LDFLAGS) $(RLM_LDFLAGS) -o radeapclient radeapclient.lo $(CLIENTLIBS) $(LIBS) $(OPENSSL_LIBS)

After editing done

$(LIBTOOL) --mode=link $(CC) $(LDFLAGS) $(RLM_LDFLAGS) -lfreeradius-radius-2.1.8 -o radeapclient radeapclient.lo $(CLIENTLIBS) $(LIBS) $(OPENSSL_LIBS)

Save & Exit.

now run make and make install again.

make
make install


++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Set the correct ownership on FreeRadius configuration files
================================================

chown www-data /usr/local/etc/raddb
chown www-data /usr/local/etc/raddb/clients.conf

TIP:

Review and edit (if required) the MySQL credentials in /usr/local/etc/raddb/sql.conf (Just in case you have mentioned different password/id for mysql)

.

Creating MySQL databases with MySQL command line tool
===============================================

mysql -u root -ppassword

CREATE DATABASE radius;
CREATE DATABASE conntrack;
CREATE USER 'radius'@'localhost' IDENTIFIED BY 'yourpass';
CREATE USER 'conntrack'@'localhost' IDENTIFIED BY 'yourpass';
GRANT ALL ON radius.* TO radius@localhost;
GRANT ALL ON conntrack.* TO conntrack@localhost;
exit

==================================
Time to Install RADIUS MANAGER 4.0.4

==================================

Copy the radius manager radiusmanager-4.0.4.tgz (or your version) in any temp folder
now extract it using


tar zxvf radiusmanager-4.0.4.tgz
cd radiusmanager-4.0.4/
chmod +x install.sh

Start RADIUS MANAGER Installation script

Execute the installation Script . . .

(If you are new to radius manager installation, use default password scheme, it will save you from few headaches, BUT later on as you will get familiar with the system, CHANGE the default passwords as its risk to use default password)


./install.sh

Now the install script will ask few questions . . . Select answers as per your local design.

For example:
Select the Operating  System
2
(For Ubuntu)

Select Installation type:
1
(New Installation)

WWW root path:
Press Enter to select the Default , which is /var/www

Radius Database host:
Press Enter to select the Default , which is localhost

Radius Database username:
Press Enter to select the Default , which is radius

Radius Database password:
Press Enter to select the Default , which is radius123

CTS Database host:
Press Enter to select the Default , which is localhost

CTS database username:
Press Enter to select the Default , which is conntrack

CTS database password:
Press Enter to select the Default , which is conn123

Freeradius UNIX User:
Press Enter to select the Default , which is root

Httpd Unix User:
Press Enter to select the Default , which is www-data

Create rmpoller service:
Press Enter to select the Default , which is y (yes)

create rmconntrack service:
Press Enter to select the Default , which is y (yes)

Backup Radius database:
Press Enter to select the Default , which is y (yes)

Now it will ask if you want to start the installation
Press y and press ENTER to continue the installation.

and at the end you will INSTALLATION COMPLETE!


As showed in the image below . . .

radius-installation-complete

Now copy the two license files (that you receive from DMASOFTLAB) in /var/www/radiusmanager

lic.txt
mode.txt

Now access the admin panel from your browser

http://yourip/radiusmanager/admin.php

As showed in the image below . . .

rm-admin-panel

.

rm-admin-panel-2

Adding NAS (Mikrotik) in Radius Manager + Mikrotik Radius Configuration for RM

RADIUS MANAGER SECTION:

Login to Administration Control Panel (ACP) of RM.
Goto NAS / NEW
Fill the required info, Like Mikrotik name, IP address, Secret
As showed in the image below . . .

new-nas1

new-nas2.

.

.

.

▼▲▼▲▼▲▼▲▼▲▼▲

MIKROTIK SECTION

▼▲▼▲▼▲▼▲▼▲▼▲

 

Now Login to Mikrotik,
Goto PPP Section
Click on PPP Authentication & Accounting
Click on Use Radius
As showed in the image below . . .

mikrotik-rad-1

mikrotik-rad2

Now create any user in RM, and connect it from client end using pppoe (or test it via radtest).

Examples.

rm-online-users

.

all-showed

radius-2

radtest

TIPS:

.

Testing Radius via radtest

First edit /etc/hosts

and change the system name to local host ip i.e 127.0.0.1
as showed in the example below. . .

radius-hosts

Don’t forget to restart radiusd after making changes to the NAS list!

service radiusd restart

Now issue following commands to test.


radtest user 1111 127.0.0.1 1812 testing123

and you may see following. (with access-accept)

radius-radtest-OK

Various Errors & Troubleshooting . . .

1# : IF YOU ARE USING CUSTOM PASSWORD (NOT DEFAULT)

If you see the following error while accessing admin.php

Could not connect to localhost

could-not-connect-mysqlsIf you are using your own password (other then default password of rm, ) then Make sure your passwords for radius and conntrack hosts are set correctly in


/etc/radiusmanager.cfg

/var/www/radiusmanager/config/system_cfg.php

/usr/local/etc/raddb/sql.conf

2# :Blank page is showing while accessing admin.php

If you see blank page while accessing admin.php , following could be wrong.
a- Your license files are not valid or expired.
b- you have not installed ioncube library correctly.

To test if your license is valid, tail the /var/log/apache2/access.log and error.log , they will show you if your license have issues like expired or invalid dueto mac address restrictions.

To test IONCUBE LIBRARY , Open Terminal and Type

php -v

& you should see something similar to below . . . (Focus on Last line that says with the ioncube php loader . . .)

root@zaib-desktop:~# php -v

PHP 5.3.2-1ubuntu4.18 with Suhosin-Patch (cli) (built: Sep 12 2012 19:33:42)
 Copyright (c) 1997-2009 The PHP Group
 Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies
     with the ionCube PHP Loader v4.2.2, Copyright (c) 2002-2012, by ionCube Ltd.

3# : Incorrect User name & Passowrds in Mikrotik LOG

you are seeing ‘Incorrect user name and password error’ in mikrotik logs for the users created on RM, then make sure you have defined correct password in  /usr/local/etc/raddb/sql.conf

4# : NAS NOT FOUND in RADTEST

If you see NAS NOT FOUND in radtest, please see the heading “Testing Radius via radtest“.

If the hostname is different than localhost, (like you have some other hostname name for the machine e.g: radius, then

Edit /etc/hosts

and change the system name to local host ip i.e 127.0.0.1

As showed in the example below . . .

radius-hosts

Don’t forget to restart radiusd after making changes to the NAS list!


service radiusd restart

▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲

Part-2 # COMPLETE BACKUP

▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲

Use the following link to get the backup script.

https://aacable.wordpress.com/2011/11/16/dmasoftlab-radius-manager-backup-script/

Or use the manual method

To take full backup use the following.

Create backup folder in root /


 mkdir /backup

Now copy whole contents of following folders ,

/etc
/usr/local
/var/www
/var/lib/mysql



TIP: You can use following commands to copy whole contents and zip it

tar cfz /backup/myrmbackup.tgz /etc /home/root /usr/local /var/www /var/lib/mysql

You can schedule it run on daily basis.

Now Create mysql dump of mysql database of DB RADIUS
(which have RM User and other Data)

mysqldump -u radius -pRADIUSPASSWORD radius > /backup/db_full_type_current_date.sql
gzip -f /backup/db_full_type_current_date.sql

(Tip# To unzip the .gz file, use gzip -d filename.gz )

▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲

Part-3 # RESTORE FROM BACKUP

▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲

If somehow your server crashes, and you got to re-built it from scratch , you can restore the database using below procedure. (To simplify things, use the same OS)

1) Install OS (Same as previous one, in this example Ubuntu)
2) Install RM with the same same config you used for previous installation, e.g: radius db passwords and folders locations
3) Restore all the folders from the backup to there original locations.(backup that taken in part-2 backup part)
by using command in / folder (main root folder)

tar zxvf full_data.tgz (or file name)

4) Now its time to restore mysql radius DB, use the below command to restore DB in mysql.

mysql -u root -prootpassword radius < db_full_type_current_date.sql

Change the db_full_type_current_date.sql to match your mysql backup file.

Now restart your box onc time.

If you receive ‘cannot connect to localhost‘ check the passwords in

/etc/radiusmanager.cfg
/var/www/radiusmanager/config/system_cfg.ph
/usr/local/etc/raddb/sql.conf

Also check the DB password for user radius  in mysql , You can change the DB password via using this command

mysql -u root -pYOURPASSWORD
use mysql;
SET PASSWORD for 'radius'@'localhost' = PASSWORD('radius123');
# MORE EXAMPLE for RADIUS MANAGER RELATED
SET PASSWORD for 'conntrack'@'localhost' = PASSWORD('conn123');


Now restart your box and hopefully everything will be restored back to normal

.

.

.


▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼

Some  TiPS  For  Customizations . . .

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲


Howto Configure Email notifications 

To configure Email server, edit following,

/var/www/radiusmanager/config/system_cfg.php

Goto SMTP section, and modify it as per your local SMTP server/user/domain.
Example:

// SMTP definitions

define('smtp_relay', '1.2.3.4');                          // SMTP relay
define('smtp_port', 25);                                    // SMTP port
define('smtp_auth', FALSE);                             // SMTP authentication
define('smtp_user', 'syed.jahanzaib');           // SMTP user name
define('smtp_psw', 'my_pass');                       // SMTP password
define('mail_from', 'zaib@xyz.com');             // sender address
define('mail_fromname', 'Syed Jahanzaib');  // sender name
define('mail_newuser', 'zaib@xyz.com');      // self registered new user notification
define('mail_localdomain', 'xyz.com');           // default domain name

Now configure some settings in ACP / Systems / Ssytem Settings

email-sms-alert-config

.

.

.


HOWTO REPLACE/MODIFY DMASOFTLAB RM LOGO and TEXT !!!

You can Replace/Edit the default DMASOFTLAB logo files. by default, Images are available where you have installed the radiusmanager. Look into the images folder of radiusmanager.

For example I installed RM in /var/www/html/radiusmanager. There will be a folder name ‘images’ Look for these files.

dmalogo_small.gif
radmanlogo_small.gif
main1_01.gif
main1_02.gif
main1_03.gif
emailheader.gif

.

.

.


Edit Various Text/headings Show at UCP/ACP

You can also edit the texts/descriptions in language description files in radiusmanager/lang/english folder.
look for texts.txt and strings.txt


.

.

.


To Add Logo in Prepaid Cards

You can modify its base image at radiusmanager/lang/english/card folder.
look for classic_bg.png and refill_bg.png

To add logo in prepaid classic cards, copy classic_bg.png to your windows desktop, Edit it in any image editing software (I used MS Paint Brush default), add Your logo , Save this file in .jpg extension like classic_bg.jpg , now upload this file back to radiusmanager/lang/english/card

Now edit following file,

/var/www/radiusmanager/config/system_cfg.php

and rename the classic_bg.png  to >  classic_bg.jpg ,

As showed in the image below …

refill_2

Save & Exit.

Now generate your cards, and you will see your logo shining 🙂

refill_3

.

.


To clear LOGS in RM ACP [last syslog events]

mysql -uroot -pSQLPASSWD -e "truncate rm_syslog" radius

.

.


PHP Warning: main(config/payfast_cfg.php): failed to open stream: No such file or directory in /var/www/radiusmanager/user.php on line 0

If you received following error

PHP Warning: main(config/payfast_cfg.php): failed to open stream: No such file or directory in /var/www/radiusmanager/user.php on line

Just rename the following file

/var/www/radiusmanager/config/payfast_cfg.php.dist

to

/var/www/radiusmanager/config/payfast_cfg.php

.

.


Simultaneous Session config for user in Mikrotik/RM

If you want to allow simultaneous session for specific Users …

1- Set SHARED USERS option in User Profile to required number of simultaneous users … As showed in the image below …

3-mt-hotspot-default-profile-user

2- In USER EDIT properties, modify the number of simultaneous users you want to allow (specific User or Group) … As showed in the image below …

2-rm user shared user option

3- Now test by login same ID with 2 computers … As showed in the image below …

1- rm

.


.

.


Modify Country Listing

To modify country list appear in the country list, you can modify following file

/var/www/radiusmanager/config/system_cfg.php

Look for // Country List, and modify it as per requirements, Modified Example is below …

rm_country_list

.

Save, Exit, and reload RM ACP page, and you will see new country listing in the list.



AP’S STOPS SHOWING SIGNALS IN ONLINE USERS

If AP’s Signals stops showing in Online Users, try

Delete the stale lockfile (/tmp/wlanpoller.pid).


Allow Special characters in Username / Passwords

By default special characters are not allowed even dash, at the rate sign etc. To allowt hem open the config file (in ubuntu path is following,

nano /var/www/radiusmanager/config/system_cfg.php

for centos  user,

nano /var/www/html/radiusmanager/config/system_cfg.php

and

Search following


regexp_username

regexp_managername

regexp_psw

and replace old values with following

define('regexp_username', '/^[a-z0-9._!@#$%&*]+$/');                  // regular expression for validating user names

define('regexp_managername', '/^[a-z0-9._!@#$%&*]+$/');               // regular expression for validating manager names

define('regexp_psw', '/^[a-zA-Z0-9._!@#$%&*]+$/');                    // regular expression for validating passwords

Save and exit. and reload the admin page in browser.


 Radius LOGS

/usr/local/var/log/radius


Create short name for Radius Admin Panel

Example: If you want to access radius admin panel using short name , something like

http://10.0.0.1/panel

then Edit file `/etc/apache2/sites-enabled/000-default`

and add lines in the end (but before /virtualhost directive, so the last line of this files should be like this…

<sourcecode>
Alias /panel /var/www/radiusmanager
<Directory /var/www/radiusmanager>
DirectoryIndex admin.php
Options Includes Indexes FollowSymLinks MultiViews
</Directory>
</VirtualHost>
</sourcecode>

 


Allah Hafiz

🙂

.

Regard’s
Syed Jahanzaib
aacable [at] hotmail.com

Advertisements

114 Comments »

  1. Thanks for the information
    But I’m having some difficulties were the most successful in the installation
    Please explain the installation process more accurately

    Like

    Comment by mustafa — December 2, 2012 @ 6:40 PM

  2. Thank you for your wonderful guide brother. I have installed Radius Manager, but can’t see to get MAC authentication to work. Specifically, when enter the MAC address as the username, it keep insisting I enter a password. Obviously, I should not have to for MAC authentication. Any help is much appreciated. Jazak Allah Kheir.

    Like

    Comment by Ibrahiem Khatib — December 20, 2012 @ 9:30 PM

    • can you help me in intalling dmasoftlab sir? i cant connect with my radius..

      Like

      Comment by ener — June 6, 2013 @ 4:49 PM

  3. aslam-alikum…
    i am new person of ubuntu .now iam installing your guideness of dma softlab rm.but installing process i have some command problems please send my email me full details of commands please..please

    Like

    Comment by prasad — January 27, 2013 @ 10:16 AM

  4. hello sayed
    please i have aproblim in make freeradius and i try the soliotion and it still

    Like

    Comment by afandi — February 13, 2013 @ 7:14 AM

  5. my radius currently in /var/www/html/radiusmanager
    I’m trying to find where database for list_cardseries & list_classic_prepaid_card in radius manager?
    Any help is much appreciated.

    Like

    Comment by Anuar — May 12, 2013 @ 8:45 AM

    • It is stored under RADIUS database of mysql. I recommend you to install phpMyadmin on RM box, and use its GUI to access DB and modify it carefully as per your requirements. Just make sure you do full backup of DB before any modification 🙂 I had some bad experience by accidentally corruption.

      Like

      Comment by Syed Jahanzaib / Pinochio~:) — May 13, 2013 @ 8:45 AM

  6. Hi Sayed Please could be possible to you to send me via email the backup script? thanks

    Like

    Comment by Marcel Fossua — May 25, 2013 @ 4:45 AM

  7. gcc -o .libs/radeapclient .libs/radeapclient.o libeap/.libs/libfreeradius-eap.so -lnsl -lresolv -lpthread
    /usr/bin/ld: .libs/radeapclient.o: undefined reference to symbol ‘fr_perror’
    /usr/bin/ld: note: ‘fr_perror’ is defined in DSO /root/freeradius-server-2.1.8/src/lib/.libs/libfreeradius-radius-2.1.8.so so try adding it to the linker command line
    /root/freeradius-server-2.1.8/src/lib/.libs/libfreeradius-radius-2.1.8.so: could not read symbols: Invalid operation
    collect2: ld returned 1 exit status
    make[6]: *** [radeapclient] Error 1
    make[6]: Leaving directory `/root/freeradius-server-2.1.8/src/modules/rlm_eap’
    make[5]: *** [common] Error 2
    make[5]: Leaving directory `/root/freeradius-server-2.1.8/src/modules’
    make[4]: *** [all] Error 2
    make[4]: Leaving directory `/root/freeradius-server-2.1.8/src/modules’
    make[3]: *** [common] Error 2
    make[3]: Leaving directory `/root/freeradius-server-2.1.8/src’
    make[2]: *** [all] Error 2
    make[2]: Leaving directory `/root/freeradius-server-2.1.8/src’
    make[1]: *** [common] Error 2
    make[1]: Leaving directory `/root/freeradius-server-2.1.8′
    make: *** [all] Error 2

    i always get that error after following the steps. please help me i need guide

    Like

    Comment by jizznerener — May 30, 2013 @ 7:54 PM

  8. mysql -u root -ppassword
    CREATE DATABASE radius;
    CREATE DATABASE conntrack;
    CREATE USER ‘radius’@’localhost’ IDENTIFIED BY ‘yourpass’;
    CREATE USER ‘conntrack’@’localhost’ IDENTIFIED BY ‘yourpass’;
    GRANT ALL ON radius.* TO radius@localhost;
    GRANT ALL ON conntrack.* TO conntrack@localhost;
    exit

    what password to input in ‘yourpass’ ? please need help

    Like

    Comment by widosyphilner — May 31, 2013 @ 9:35 AM

    • yourpass‘ means type any password you like to use. it will be your security, so choose wisely. or just go plain for test purposes. like
      testing123
      😉
      but make sure not to use simple password on production environment.

      Like

      Comment by Syed Jahanzaib / Pinochio~:) — May 31, 2013 @ 11:58 AM

  9. i cant add new NAS, it gives me an error “IP address is not valid!” why is this? cant test radius manager if its like this.. need help please..

    Like

    Comment by widosyphil — June 4, 2013 @ 6:02 AM

  10. i had followed the tutorial from scratch, why does it give me Accept-Request? need help anyone.

    Like

    Comment by ener — June 6, 2013 @ 4:25 PM

  11. this dont work!

    Like

    Comment by stupid — June 7, 2013 @ 8:41 AM

    • yes i dont work , i have tried it. author please revive your thread and tutorials.

      Like

      Comment by freak — June 7, 2013 @ 10:08 AM

      • It works for sure.
        Its tested at various installation.

        Like

        Comment by Syed Jahanzaib / Pinochio~:) — June 7, 2013 @ 11:56 AM

      • its tested? have you tested it?
        this tutorial has errors like radtest, radius manager, database communication error

        this would only make starters confuse.. you should try it and see if works or not..
        not just copy paste in installation manual.. no offense

        Like

        Comment by sheenhems — June 7, 2013 @ 12:45 PM

      • Dear Viktor, Thank you for pointing errors in the guide.
        I will re check it. Actually I said earlier that Its a working guide and I have install few RM installation by using this tutorial. Possibly it may have errors, I will surely check it in free timings and will update it soon.

        Like

        Comment by Syed Jahanzaib / Pinochio~:) — June 7, 2013 @ 4:06 PM

      • Fixed.
        Issue was with some wordpress formatting, some missing entries for ubuntu. (hostname vs radtest) etc.

        Like

        Comment by Syed Jahanzaib / Pinochio~:) — June 10, 2013 @ 3:38 PM

      • I will re check it again. Actually I said earlier that Its a working guide and I have installed few RM installation by using this tutorial. Possibly it may have errors, I will surely check it in free timings and will update it soon.

        Like

        Comment by Syed Jahanzaib / Pinochio~:) — June 7, 2013 @ 5:02 PM

    • Plz check it now.

      Like

      Comment by Syed Jahanzaib / Pinochio~:) — June 10, 2013 @ 1:35 PM

  12. Hello Aki
    what IP address will be inputed in radius manager NAS options?
    and what Radius will be used ing mikrotik? is it the Host IP of external radius manager?

    Like

    Comment by bisong — June 7, 2013 @ 2:45 PM

    • in RM NAS, type your mikrotik ip
      in Mikrotik, type your RM ip.
      (both must be reachable to each other at lyaer3. either its local or WAN doesn’t matter.

      Like

      Comment by Syed Jahanzaib / Pinochio~:) — June 10, 2013 @ 1:34 PM

  13. hey ive followed the tutorial same goes to me i have Accepf-Request error. please help solve this please..

    Like

    Comment by austin — June 8, 2013 @ 4:12 PM

  14. can someone help me? i have radius manager 4 installed 1 week ago and i dont know how to run it up. rstavri@gmail.com

    Like

    Comment by Rinush — July 9, 2013 @ 7:39 PM

  15. hi.

    if a user account expire. how to send a web page like a hotspot to inform that his subscription has expired???
    now when a account expire the client pppoe dont connect.

    what about client with static ip ? I have a /28 block. how to use them ? I tested yesterday and client gets the static ip but no the right gateway ( the gateway an ip from the nas pool)

    Like

    Comment by Rinush — July 10, 2013 @ 2:04 PM

  16. Incorrect file format ‘rm_wlan’ what is this error ???
    i get it when i want to see online radius users or when i want to find a user

    Like

    Comment by rini — July 21, 2013 @ 2:20 AM

  17. Hi sir,

    i have complete radiusmanager installation but not open admin page The error is ” It works!

    This is the default web page for this server.

    The web server software is running but no content has been added, yet.” , what is the problem of webpage

    Like

    Comment by siva — July 25, 2013 @ 2:39 PM

  18. it says radius mangar is not responding why??? 😦

    Like

    Comment by Fatih — September 7, 2013 @ 5:07 AM

  19. Do u have a copy of Radius Manager 4? I need it for learning purpose only.

    Like

    Comment by srijit — September 13, 2013 @ 8:27 AM

  20. Reblogged this on Srijit Banerjee's Blog.

    Like

    Comment by srijitb — September 13, 2013 @ 8:55 AM

  21. salam alaekom ,, i can’t access http://serverip/radiusmanager/admin.php ,,, and i can’t connect with any user from radiusmanager but i can access with user from MT , when i try to connect to my ACP radius .. squid block me ?? plz help

    Like

    Comment by Mahdi — November 11, 2013 @ 1:41 AM

  22. Dear Sir,
    I can’t install the required binaries and dependencies on Ubuntu 12.04 LTS (both desktop/server 32-bit). It says cannot locate ‘package’. What to do??

    Like

    Comment by Arjun Neupane — March 18, 2014 @ 3:57 PM

  23. I get the following error while installing on fedora 20.

    /usr/bin/ld: cannot find -lfreeradius-radius-2.1.8
    collect2: error: ld returned 1 exit status
    gmake[6]: *** [radeapclient] Error 1
    gmake[6]: Leaving directory `/temp/freeradius-server-2.1.8/src/modules/rlm_eap’
    gmake[5]: *** [common] Error 2
    gmake[5]: Leaving directory `/temp/freeradius-server-2.1.8/src/modules’
    gmake[4]: *** [all] Error 2
    gmake[4]: Leaving directory `/temp/freeradius-server-2.1.8/src/modules’
    gmake[3]: *** [common] Error 2
    gmake[3]: Leaving directory `/temp/freeradius-server-2.1.8/src’
    gmake[2]: *** [all] Error 2
    gmake[2]: Leaving directory `/temp/freeradius-server-2.1.8/src’
    gmake[1]: *** [common] Error 2
    gmake[1]: Leaving directory `/temp/freeradius-server-2.1.8′
    make: *** [all] Error 2

    Like

    Comment by Arjun — March 19, 2014 @ 11:19 AM

  24. Very nice Guide , However the link to install the freeradius patch doesnt exist on the dmasoftlab download section, One more thing , the lic.txt file must be at 775 permission to run the admin.php, else a blank page, Thanks

    Like

    Comment by Dr Anupam — June 21, 2014 @ 8:48 PM

  25. make install error : Hi… thanks a lot for such useful post. Like Make I was getting error for make install as well….

    Like below line
    $(LIBTOOL) –mode=link $(CC) $(LDFLAGS) $(RLM_LDFLAGS) -lfreeradius-radius-2.1.8 -o radeapclient radeapclient.lo $(CLIENTLIBS) $(LIBS) $(OPENSSL_LIBS) …..

    there is line $(LIBTOOL) –mode=install…. u need to add -lfreeradius-radius-2.1.8 there also and it will sove the problem.

    Like

    Comment by shekhar — December 31, 2014 @ 12:06 PM

  26. [root@localhost ~]# php -v
    PHP 5.3.3 (cli) (built: Oct 30 2014 20:12:53)
    Copyright (c) 1997-2010 The PHP Group
    Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies
    with the ionCube PHP Loader v4.2.2, Copyright (c) 2002-2012, by ionCube Ltd.

    [root@localhost ~]# tail -f /var/log/httpd/error_log
    [Tue Jan 27 11:07:42 2015] [error] [client ::1] PHP Notice: Undefined index: cont in /var/www/html/radiusmanager/admin.php on line 0
    [Tue Jan 27 11:07:42 2015] [error] [client ::1] PHP Notice: Undefined index: nomaintpl in /var/www/html/radiusmanager/admin.php on line 0
    [Tue Jan 27 11:07:42 2015] [error] [client ::1] PHP Notice: Undefined index: cont in /var/www/html/radiusmanager/admin.php on line 0
    [Tue Jan 27 11:07:42 2015] [error] [client ::1] PHP Fatal error: Call to undefined function [obfuscated]() in /var/www/html/radiusmanager/misc.php on line 0
    [Tue Jan 27 11:15:06 2015] [error] [client ::1] PHP Notice: Undefined index: cont in /var/www/html/radiusmanager/admin.php on line 0
    [Tue Jan 27 11:15:06 2015] [error] [client ::1] PHP Notice: Undefined index: _lang in /var/www/html/radiusmanager/misc.php on line 0
    [Tue Jan 27 11:15:06 2015] [error] [client ::1] PHP Notice: Undefined index: cont in /var/www/html/radiusmanager/admin.php on line 0
    [Tue Jan 27 11:15:06 2015] [error] [client ::1] PHP Notice: Undefined index: nomaintpl in /var/www/html/radiusmanager/admin.php on line 0
    [Tue Jan 27 11:15:06 2015] [error] [client ::1] PHP Notice: Undefined index: cont in /var/www/html/radiusmanager/admin.php on line 0
    [Tue Jan 27 11:15:06 2015] [error] [client ::1] PHP Fatal error: Call to undefined function [obfuscated]() in /var/www/html/radiusmanager/misc.php on line 0

    CentOS with Radius Manager installed 4.1.6 I get errors when I enter admin/1111

    THanks for your help!

    Like

    Comment by Beny — January 27, 2015 @ 3:17 PM

    • add me in skype and provide remote access for the radius box if possible.

      Like

      Comment by Syed Jahanzaib / Pinochio~:) — January 27, 2015 @ 3:18 PM

      • I don’t have public IP, I got trial license from DMA today and tried to make working but does not, when I remove license files I get license error message, when I put them back I get errors above.

        Regards,

        Like

        Comment by Beny — January 27, 2015 @ 9:47 PM

      • use ubuntu 12.4 32bit

        Like

        Comment by Syed Jahanzaib / Pinochio~:) — January 28, 2015 @ 3:10 PM

    • and what error comes in access.log ?

      Like

      Comment by Syed Jahanzaib / Pinochio~:) — January 27, 2015 @ 3:22 PM

      • 192.168.108.1 – – [27/Jan/2015:18:39:54 +0100] “GET /radiusmanager/admin.php HTTP/1.1” 500 – “-” “Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko”
        192.168.108.1 – – [27/Jan/2015:18:39:57 +0100] “GET /radiusmanager/admin.php HTTP/1.1” 500 – “-” “Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko”
        192.168.108.1 – – [27/Jan/2015:18:40:02 +0100] “GET /radiusmanager/admin.php HTTP/1.1” 500 – “-” “Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko”

        Like

        Comment by Beny — January 28, 2015 @ 3:06 PM

      • I separated because can not reply all of them in one comment.

        Like

        Comment by Beny — January 28, 2015 @ 3:08 PM

  27. Hi Very Nice Info, thanks for sharing

    I am trying to install on Ubuntu 14.04 LST and I am getting below error.

    Can you please help me to resolve that.

    Below are my system specification

    Ubuntu Server 14,04
    PHP 5.5.9
    ionCube : 5.5
    FreeRadius 2.2.0

    When I am trying to access admin page of radiusmanager I am getting below error

    [Sun Feb 01 17:07:03.910138 2015] [:error] [pid 5427] [client ::1:53580] PHP Fatal error: The file /var/www/radiusmanager/admin.php was encoded by the ionCube Encoder for PHP 4 and cannot run under PHP 5.5 or PHP 5.6.\\n Please ask the provider of the script to provide a version encoded with the ionCube Encoder for either PHP 5.3 or PHP 5.4 or PHP 5.5. in Unknown on line 0

    Like

    Comment by Mihir — February 6, 2015 @ 9:57 AM

    • its the issue of php with ver 14.x
      try to use ubuntu 12.x and you will be fine with it.

      Like

      Comment by Syed Jahanzaib / Pinochio~:) — February 9, 2015 @ 3:33 PM

    • HI there,

      Tried to install on Ubuntu 12.10 and get the error bellow:

      root@LocalRadius:/temp# apt-get install mc wget rcconf make gcc mysql-server mysql-client libmysqlclient15-dev libperl-dev curl php5 php5-mysql php5-cli php5-curl php5-mcrypt php5-gd php5-snmp
      Reading package lists… Done
      Building dependency tree
      Reading state information… Done
      Package make is not available, but is referred to by another package.
      This may mean that the package is missing, has been obsoleted, or
      is only available from another source

      E: Unable to locate package mc
      E: Unable to locate package rcconf
      E: Package ‘make’ has no installation candidate
      E: Unable to locate package gcc
      E: Unable to locate package mysql-server
      E: Unable to locate package mysql-client
      E: Unable to locate package libmysqlclient15-dev
      E: Unable to locate package libperl-dev
      E: Unable to locate package php5
      E: Unable to locate package php5-mysql
      E: Unable to locate package php5-cli
      E: Unable to locate package php5-curl
      E: Unable to locate package php5-mcrypt
      E: Unable to locate package php5-gd
      E: Unable to locate package php5-snmp

      Like

      Comment by Beny — February 18, 2015 @ 10:25 PM

  28. Salam

    bohat shukriya ap k is blog k ley.

    radtest user 1111 127.0.0.1 1812 testing123 enter karnay k bad

    Sending Access-Request of id 69 to 127.0.0.1 port 1812
    User-Name = “user”
    User-Password = “1111”
    NAS-IP-Address = 127.0.0.1
    NAS-Port = 1812
    Message-Authenticator = 0x00000000000000000000000000000000
    rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=69, length=20

    Access-Reject keyon aa raha hai?
    Admin default username password kiya hai? username: admin or password: admin kam nahi kar raha

    meharbani farma kar kuch rehnumai farmain

    Like

    Comment by Zia — March 16, 2015 @ 2:54 AM

    • I used
      # Variables & Paths [jz]
      wwwpath=”/var/www/html”
      radhost=”localhost”
      myusr_rad=”radius”
      mypsw_radius=”testing786″
      ctshost=”localhost”
      myusr_cts=”conntrack”
      mypsw_cts=”conn123″
      radusr=”root”
      httpusr=”apache”

      when I execute following
      radtest user 1111 127.0.0.1 1812 testing786

      then I am getting:

      Sending Access-Request of id 237 to 127.0.0.1 port 1812
      User-Name = “user”
      User-Password = “1111”
      NAS-IP-Address = 127.0.0.1
      NAS-Port = 1812
      Message-Authenticator = 0x00000000000000000000000000000000
      Sending Access-Request of id 237 to 127.0.0.1 port 1812
      User-Name = “user”
      User-Password = “1111”
      NAS-IP-Address = 127.0.0.1
      NAS-Port = 1812
      Message-Authenticator = 0x00000000000000000000000000000000
      Sending Access-Request of id 237 to 127.0.0.1 port 1812
      User-Name = “user”
      User-Password = “1111”
      NAS-IP-Address = 127.0.0.1
      NAS-Port = 1812
      Message-Authenticator = 0x00000000000000000000000000000000
      radclient: no response from server for ID 237 socket 3

      Also please help me with admin login details

      Like

      Comment by Zia — March 16, 2015 @ 3:05 AM

  29. Dear Jahanzaib

    Everything is working. Radius Manager is installed, License File updated, NAS are configured in both mikrotik & RM… but when i make a new user in RM and after authenticating the user form a Client End, No IP is assigning 0.0.0.0 … however when I make a user from mikrotik… Its get the IP Address from DHCP Pool.

    how a ip is assinged from NAS (RM-Linux)??

    Like

    Comment by kashifzai86 — May 19, 2015 @ 12:05 PM

  30. Call to undefined function [obfuscated]() in /var/www/html/radiusmanager/misc.php on line 0 ??

    Like

    Comment by rosario — November 24, 2015 @ 9:45 PM

  31. the folowing command was not working

    echo “zend_extension=/usr/local/ioncube/ioncube_loader_lin_5.3.so” >> /etc/php5/apache2/php.ini
    echo “zend_extension=/usr/local/ioncube/ioncube_loader_lin_5.3.so” >> /etc/php5/cli/php.ini

    here is correct version of above command

    zend_extension=/usr/local/ioncube/ioncube_loader_lin_5.3.so >> /etc/php5/apache2/php.ini
    zend_extension=/usr/local/ioncube/ioncube_loader_lin_5.3.so >> /etc/php5/cli/php.ini

    Like

    Comment by Mohsin — January 4, 2016 @ 9:25 PM

  32. This version is not available now
    http://www.dmasoftlab.com/cont/download/freeradius-server-2.2.0-mod-1.tar.gz
    Updated version is available
    http://www.dmasoftlab.com/cont/download/freeradius-server-2.2.0-dma-patch-2.tar.gz
    Syntax error
    echo “zend_extension=/usr/local/ioncube/ioncube_loader_lin_5.3.so” >> /etc/php5/apache2/php.ini
    echo “zend_extension=/usr/local/ioncube/ioncube_loader_lin_5.3.so” >> /etc/php5/cli/php.ini
    Correct Syntex is
    zend_extension=/usr/local/ioncube/ioncube_loader_lin_5.3.so >> /etc/php5/apache2/php.ini
    zend_extension=/usr/local/ioncube/ioncube_loader_lin_5.3.so >> /etc/php5/cli/php.ini

    Like

    Comment by Mohsin — January 5, 2016 @ 9:19 AM

    • the echo command working fine. sometimes it happens if you copy paste from the blog and directly paste in putty. make sure inverted commas are pasted correctly.

      Like

      Comment by Syed Jahanzaib / Pinochio~:) — January 5, 2016 @ 9:55 AM

      • Working without echo and inverted commas

        Like

        Comment by Mohsin — January 5, 2016 @ 11:27 AM

      • Echo for auto script manual command is without echo and commas

        Like

        Comment by Mohsin — January 5, 2016 @ 11:31 AM

  33. Hello,
    Thank you for your info here, it was very very helpful for me. I installed radius manager v 4.1.6 but I have 1 big and 1 small issue and maybe someone can help me.
    The big issue is that i have to migrate manually a lot of customers with user/pass, ip,e-mail, phone, addresses etc etc.
    The billing software that i was using had a username generator and all the usernames are in capital both in Mikrotik and in customers routers. Ex. HS7NMILZ.

    Radius manager does not support capital characters by default in the username section so i tried to change the system_cfg.php:
    define(‘regexp_username’, ‘/^[a-z0-9._!@#$%&*]+$/’);
    to define(‘regexp_username’, ‘/^[AZa-z0-9._!@#$%&*]+$/’);

    but with no results. It was saving the clients with small characters like no change was made.

    I also tried:
    define(‘regexp_username’, ‘/^[A-Z0-9._!@#$%&*]+$/’); and then it was saying Invalid Username.

    Has anyone any idea how i can solve this?
    I’m having a big trouble bcz changing all usernames is a real mess right now.

    The other “small” problem is that the password after saving a customer is not shown in the edit customer section, it is full of asterix ******* so the only option is to change the password.
    How can i make the password visible at this point?

    Any help especially for the first one will be very appreciated

    Like

    Comment by Laert — January 14, 2016 @ 5:09 AM

    • caps letters are accepted in RM new users.
      Default system_cfg variables.

      Username field =
      define('regexp_username', '/^[a-z0-9._]+$/');

      Password field =
      define('regexp_psw', '/^[a-zA-Z0-9._]+$/');

      with above, you can enter user name and password with CAPS. I tested it and it worked (i used TEST as username, and HS7NMILZ as password.

      2nd issue, password cannot be visible as per policy.
      to view user password, you can create a simple bash script (or link it in php page for convenience)
      example showed here.

      Read the topic in above guide.
      OR use the SCRIPT to view all users password in clear text format

      Like

      Comment by Syed Jahanzaib / Pinochio~:) — January 14, 2016 @ 11:37 AM

  34. Hello. I used radius manager dma softlab. My network card died so I can’t access the admin page anymore. Changing card is not an option. I don’t plan to use radius manager anymore but i need information that i have input about users. Is there some way to access this data on the existing computer (centos)? If not, can i somehow open database of the radius in a different way? Someone else installed radiusmanager. That person is not available for assistance and I don’t know any expert I could contact for help.

    Like

    Comment by nina — January 27, 2016 @ 7:21 PM

    • if you ahve mysql backup, then its easier to see the data in .sql file.
      if you dont have backup, then you have to take the LONG route, by installing mysql again, and import the files from the old data.

      Like

      Comment by Syed Jahanzaib / Pinochio~:) — January 28, 2016 @ 1:05 PM

  35. I have backup.sql file if that is what you mean but it contains only about 20 lines of comments (everything is in /*). I don’t know what to do with it.

    Like

    Comment by nina — January 30, 2016 @ 7:05 PM

  36. how to bind mac-address of user automatically at the first request

    Like

    Comment by Praveen — February 24, 2016 @ 11:51 AM

    • This feature is not available for the normal users you manually created.
      It only works for the prepaid cards users only.

      I guess you can make a bash script which can read the new accounts first login and bind there mac addresses in the radius users properties.

      Like

      Comment by Syed Jahanzaib / Pinochio~:) — February 25, 2016 @ 10:32 AM

  37. how can i change RM gui looks and want to add my own logo in gui

    Like

    Comment by Pawan Sharma — March 10, 2016 @ 10:23 AM

  38. I want to fetch live data, user report’s in my own php software from dmasoftlab and manage it personally how can it be possible.

    Like

    Comment by Parth Amin — March 18, 2016 @ 3:44 PM

  39. I have changed country list, SMTP list. But it is not working as i want. full country list is showing & mail is not working

    Like

    Comment by Md Ikhtiaruddin — April 13, 2016 @ 6:01 AM

  40. I have changed SMTP & country list. But not working

    Like

    Comment by Md Ikhtiaruddin — April 13, 2016 @ 6:08 AM

  41. Hello sir ! Thank you for sharing your knowledge .

    I had a radius server 4.1.6 on a computer running on centos 6 ( from your automate script ) . Now i backed up and restore on another centos host . Also i backup users and services .

    The problem is that users cannot logon to the radius but when i add a new user to radius it works ok and everything is good .

    Please can you help me with the problem ?
    Thank you

    I run the radiusd -X and there is the log :
    ______________________________________________________________________

    # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
    +- entering group authorize {…}
    ++[preprocess] returns ok
    [chap] Setting ‘Auth-Type := CHAP’
    ++[chap] returns ok
    ++[mschap] returns noop
    ++[digest] returns noop
    [suffix] No ‘@’ in User-Name = “diverso”, looking up realm NULL
    [suffix] No such realm “NULL”
    ++[suffix] returns noop
    [eap] No EAP-Message, not doing EAP
    ++[eap] returns noop
    [files] users: Matched entry DEFAULT at line 50
    [files] expand: /usr/local/bin/rmauth “%{NAS-IP-Address}” “%{User-Name}” “%{Calling-Station-Id}” -> /usr/local/bin/rmauth “10.50.50.1” “diverso” “00:0C:42:60:EC:5E”
    ++[files] returns ok
    [sql] expand: %{User-Name} -> diverso
    [sql] sql_set_user escaped user –> ‘diverso’
    rlm_sql (sql): Reserving sql socket id: 1
    [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = ‘%{SQL-User-Name}’ ORDER BY id -> SELECT id, username, att ribute, value, op FROM radcheck WHERE username = ‘diverso’ ORDER BY id
    [sql] User found in radcheck table
    [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = ‘%{SQL-User-Name}’ ORDER BY id -> SELECT id, username, att ribute, value, op FROM radreply WHERE username = ‘diverso’ ORDER BY id
    [sql] expand: SELECT groupname FROM radusergroup WHERE username = ‘%{SQL-User-Name}’ ORDER BY priority -> SELECT groupname FROM raduser group WHERE username = ‘diverso’ ORDER BY priority
    rlm_sql (sql): Released sql socket id: 1
    ++[sql] returns ok
    ++[expiration] returns noop
    ++[logintime] returns noop
    [pap] WARNING! No “known good” password found for the user. Authentication may fail because of this.
    ++[pap] returns noop
    Found Auth-Type = CHAP
    # Executing group from file /usr/local/etc/raddb/sites-enabled/default
    +- entering group CHAP {…}
    [chap] login attempt by “diverso” with CHAP password
    [chap] Cleartext-Password is required for authentication
    ++[chap] returns invalid
    Failed to authenticate the user.
    Using Post-Auth-Type REJECT
    # Executing group from file /usr/local/etc/raddb/sites-enabled/default
    +- entering group REJECT {…}
    [attr_filter.access_reject] expand: %{User-Name} -> diverso
    attr_filter: Matched entry DEFAULT at line 11
    ++[attr_filter.access_reject] returns updated
    Delaying reject of request 3 for 1 seconds
    Going to the next request
    Waking up in 0.9 seconds.
    Sending delayed reject for request 3
    Sending Access-Reject of id 66 to 10.50.50.1 port 35171

    Like

    Comment by Gjergji — April 20, 2016 @ 8:44 PM

  42. Plz tell the where user logs stored ?

    Like

    Comment by basha — April 30, 2016 @ 9:45 PM

  43. Why this index in Centos 6.7 Radius Manager

    Like

    Comment by Kanudesai — May 2, 2016 @ 7:04 PM

  44. i cant acsess radius on browser

    Like

    Comment by Daxesh — May 12, 2016 @ 10:21 PM

  45. Hello good day.
    I have a problem within radiusmanager , every time I try to change a system configuration , the following message appears me : Incorrect integer value: ‘ ‘ for column ‘ unixacc ‘ at row 1

    I also different error messages appear when configuring anything that is by adding a service or user.

    Thank you and sorry for the inconvenience

    Like

    Comment by Jordi Sánchez — May 27, 2016 @ 1:03 PM

  46. Please am new to linux and any time I make the chmod +x install.sh command I get this error.

    root@ubuntu:~/radiusmanager-4.1-cumulative_patch# chmod +x install.sh
    chmod: cannot access `install.sh’: No such file or directory

    Please any Help

    Like

    Comment by Richmond — May 27, 2016 @ 2:36 PM

  47. Thank you for sharing

    I get this error anyttime I try installing chmod +x install.sh

    root@ubuntu:~/radiusmanager-4.1-cumulative_patch# chmod +x install.sh
    chmod: cannot access `install.sh’: No such file or directory

    Please Help me

    Like

    Comment by Richmond — May 27, 2016 @ 2:54 PM

  48. sir ,
    how to list radius server manager and their password via ssh ?

    Like

    Comment by rk — July 12, 2016 @ 9:47 PM

  49. My Radius Manager is working fine, I need to make the Mikrotik WAN to be static because it picks new ip address anytime it come up and this disconnects with the Radius Manager. Please help me with a mikrotik script to make static WAN. I have tried some examples online but none seems to work. Please help

    Like

    Comment by Spec — July 18, 2016 @ 1:50 AM

  50. Hi,
    My radius installation has been completed successfully and i have been able to add Mikrotik NAS. Each time i try to login to hotspot using user created from radius manager it shows radius server can not be reached. Please how can i resolve this problem

    Like

    Comment by gbale — August 25, 2016 @ 9:29 PM

  51. Hi, I have changed the SMTP settings. But it is not working

    Like

    Comment by ইখতিয়ার উদ্দীন — September 9, 2016 @ 2:41 PM

  52. Hello,
    My radius manager is installed okay.. how ever after a login to the admin portal i have an error message that my RADIUS server is not running, also when i try adding a new NAS i have an error saying that my /usr/local/etc/raddb is not accessible…

    kindly help

    Like

    Comment by William — September 28, 2016 @ 4:14 PM

  53. whats is the NAS Option? what can i write there

    Like

    Comment by Mazathcomposites — October 9, 2016 @ 11:16 AM

  54. i need add serials to the systems plz tell me how . and i have serial file

    Like

    Comment by micro — January 12, 2017 @ 6:47 PM

  55. HOW I CAN CHANGE Reply-Message IN DMA ???

    Like

    Comment by MARK — January 21, 2017 @ 6:33 AM

  56. I am getting below error after install DMA. What is the Issue ? Please Help.”GET /radiusmanager/admin.php HTTP/1.1″ 500 – “-” “Mozilla/5.0 (Windows NT 5.2; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/49.0.2623.112 Safari/537.36”

    Like

    Comment by Aghara — February 8, 2017 @ 10:55 AM

  57. [Wed Feb 08 14:27:12 2017] [error] [client ] PHP Notice: Undefined index: cont in /var/www/html/radiusmanager/admin.php on line 0
    [Wed Feb 08 14:27:12 2017] [error] [client ] PHP Notice: Undefined index: _lang in /var/www/html/radiusmanager/misc.php on line 0
    [Wed Feb 08 14:27:12 2017] [error] [client ] PHP Notice: Undefined index: cont in /var/www/html/radiusmanager/admin.php on line 0
    [Wed Feb 08 14:27:12 2017] [error] [client ] PHP Notice: Undefined index: nomaintpl in /var/www/html/radiusmanager/admin.php on line 0
    [Wed Feb 08 14:27:12 2017] [error] [client ] PHP Notice: Undefined index: cont in /var/www/html/radiusmanager/admin.php on line 0
    [Wed Feb 08 14:27:12 2017] [error] [client ] PHP Fatal error: Call to undefined function [obfuscated]() in /var/www/html/radiusmanager/misc.php on line 0

    Please find attached above error log.

    Like

    Comment by Aghara — February 8, 2017 @ 1:59 PM

  58. hi syed
    thanks for sharing knowledge
    is it possible to change http://yourip/radiusmanager/admin.php to be my IP with some port or http://my domain/radius
    i don’t want users or managers to see any details about the server
    thanks

    Like

    Comment by Karim — March 5, 2017 @ 10:58 PM

  59. hi Syed
    many thanks for your help
    i found some one did it by creating a separate file on /var/www to change radiusmanager/admin.php
    I’m trying it now, once i did it i will be happy to share it with you
    but i may ask about another issue
    i need to activate COA to change authorization on the flay with CISCO router
    i configured CISCO side with dynamic authorization and i add NAS IP as COA server in originate-coa file but still not working
    i have read the document but still didn’t succeed
    any idea if there is any special configuration to do

    thanks

    Like

    Comment by Karim — March 14, 2017 @ 10:00 PM

  60. SIr
    plz Help this Error
    PHP Fatal error: \The encoded file /var/www/radius manager/admin.php\requires
    error] [client 192.168.0.102] PHP Fatal error: \nThe encoded file /var/www/radiusmanager/admin.php\nrequires a license file lic.txt.\n in Unk

    Like

    Comment by muhammad kahsif — April 23, 2017 @ 4:49 PM


RSS feed for comments on this post. TrackBack URI

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: