Syed Jahanzaib Personal Blog to Share Knowledge !

November 22, 2012

Howto enable mikrotik to Send/Receive SMS using GSM Modem

Filed under: Mikrotik Related — Tags: , , — Syed Jahanzaib / Pinochio~:) @ 1:25 PM

More reference can be found here.

https://aacable.wordpress.com/2015/10/08/for-reference-quick-script-for-mikrotik-daily-info-via-sms-or-email/

Following is a small guide on how you can enable your mikrotik box/routerboard to send /receive SMS using GSM modem or any supported mobile set. This guide will also demonstrate that how you can enable mikrotik to receive SMS via GSM modem and execute script based on the command received in the SMS 🙂

Its very useful in many situation , for example you can configure multiple script to do various task, Few examples are that you can

  • Mikrotik Health Status,
  • create/disable users ,
  • change queues ,
  • reset router admin/user password ,
  • ask router about internet connectivity,
  • alert you if any link goes down,
  • restart router

& so much other fun things you can imagine,  another example to restart router remotely by sending SMS message to mikrotik and then it can execute the specified script, it will reboot right away. I have used this SMS function for number of tasks and it performed very well.

Hardware used for this guide

1) Mikrotik 5.20 x86 version installed on PC
2) Teltonika GSM Modem Device. (Picture attached below, you can also use any supported mobile set to do the task)

Teltonika ModemUSB/E12 UM1400

Teltonika  ModemUSB/E12 UM1400

After plugin the device into mikrotik box, reboot the mikrotik once so it can initialize the modem device.

Open Terminal and issue the following command to make view the usb port detail.

/port print

and you will see its result something like below image . . .

If you can see usb listed, it means your device have been detected.

  • Now goto TOOLS > SMS
  • Click on  ‘Receive Enabled‘ (Only if you want to enable receiving for various functions)
  • in Port, select Select USB3 (or whatever your USB port name is appearing)
  • Set the Channel to 1 [as showed in the image above]
  • In Secret type any password e.g 12345 [Secret is like your password, it is used if you want mikrotik to execute any script/command when it received appropriate sms]
  • Click APPLY

As showed in the image below . . .


Test SMS sending using Mikrotik

Now its time to send test SMS to any number using mikrotik.

  • Click on Send SMS
  • In Port, select USB3 (or whatever name of your USB is detected)
  • in Phone number, type your destination mobile number
  • in Message, type your desired message,
  • and click on SEND SMS

As showed in the image below . . .

 


Howto execute script upon receiving SMS

If you have selected ‘Receive Enabled‘, then you can receive Messages on Mikrotik in INBOX section of SMS. It can also execute any script of your choice.

For example you want to reboot your router by sending sms, use the following method.

First create appropriate script that can restart router.

/system script add name=reboot policy=ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive,api source="/system reboot"

Now from your own mobile , send the following sms to mikrotik connected GSM Device number.

:cmd 12345 script reboot

Explanation of above command.

  • :cmd = tell mikrotik that its the command it need to execute
  • 12345 = is the secret/password that we set in the SMS setting
  • script = it tells mikrotik that it have to execute script function
  • reboot = the script name we want mikrotik to run, which we created in above step.

You can do so much interesting stuff using this feature. I did used this option in the past to control my whole company network including Mikrotik/Linux/Microsoft Domain environment. It was used to power OFF / Power ON using WOL/ Reboot and many other functions.

I will write about them later . . .


TIPs:

Enabling receive-enabled via script

Receive Enabled turns off auto when the router reboots [it was observed in 5.x version no idea about later versions]. You can schedule a script that runs on every reboot and after 15 minutes of interval.

Below is a simple command to enable the receiving via terminal manually.

/tool sms set receive-enabled=yes

Now we will create script and add scheduler, We will use terminal to do the task quickly.

/system script add name=enable-sms-rec policy=\
    ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive,api \
    source="/tool sms set receive-enabled=yes;"

Now add scheduler so this script runs periodically after 15 minutes each. and on start up also.

/system scheduler
add comment="execute enable-sms-rec script" disabled=no interval=15m name=\
    "execute enable-sms-rec script" on-event=enable-sms-rec policy=\
    ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive,api \
    start-time=startup

Using NETWATCH tool to monitor your WAN connectivity

You can configure NETWATCH to monitor any WAN ip , for example Google dns, when it will timeout, it can can trigger script that can send sms so you can be aware about your WAN connectivity.

For example:

/tool netwatch
 add disabled=no down-script=”/sys script run down” host=8.8.8.8 \
 interval=5m timeout=1s up-script=”/sys script run up”

/system script
 add name=down policy=\
 ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive,api \
 source=”/tool sms send message=WAN_DOWN phone-number=03333021909 usb3”"
 add name=up policy=\
 ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive,api \
 source=”/tool sms send message=WAN_UP phone-number=03333021909 usb3”

Script SAMPLE:

Tto send reboot alert, when mikrotik reboots. schedule it to run on reboot.


# SENDING SMS TO ADMINS FOR RESTART ALERT
:delay 30s
:log error "Sending RESTART ALERT SMS ... by jz"

/tool sms send port=usb3 phone-number=03xxxxx message="ALERT: Mikrotik Routerboard CCR restarted now."  channel=0

Regard’s
Syed Jahanzaib

%d bloggers like this: