~ Article by Syed Jahanzaib ~
Crack Link for Mikrotik 3.30 have been Removed on Community Request ! 22/2/2013
I personally condemn usage of illegal/cracked version of MIKROTIK or any licensed software. I highly recommend that if you are using it just for learning purpose then its ok, otherwise if you are using it in commercial environment, then Please, Please, Please BUY it from the Mikrotik/Author WebSite. There are some grey area arguments you can make when using unlicensed software as an hobbyist individual or poor college student, but if you’re a commercial entity making money from said software, then you have little ground to stand on.
While I don’t have any problem when some very low sized network or individuals use unlicensed software when they can’t afford them.
I’m personally not comfortable stealing software and it was one of my reasons to eventually move on to Licensed Versions. I’d rather not use a program at all or get by with a more restricted free version than pirate it. I would consider making an exception for tools that are outrageously expensive for an individual, like most of Microsoft’s products, but only with the understanding that if a person makes money using those tools, they should eventually pay for them instead of riding the free piracy train.
Anyhow ‘usage of pirated software’s’ talk will never gonna end, we should get down to our business This guide will demonstrate how-to crack Mikrotik ver 3.30 >> (This version supports PCC) Hmmmmmmm
Crack Link for Mikrotik 3.30 have been Removed on Mikrotik Community Request ! 22/2/2013
Regard’s
SYED JAHANZAIB
[…] For PCC Supported version 3.30 , goto https://aacable.wordpress.com/2011/12/09/howto-crack-mikrotik-3-30-p-c-c-supported-ver-for-educationa… […]
LikeLike
Pingback by Howto crack Mikrotik Ver 3.3 [Quick Guide] (without PCC support ) « Syed Jahanzaib Personnel Blog to share knwoledge ! — December 9, 2011 @ 11:51 AM
I HAVE PROBLEM
THE INFORMATIONFOR ERROR LIKE THIS :
/DEV/HDA NO SUCH DEVISE OR ADDRESS…..
LikeLike
Comment by LIONAIR — June 18, 2012 @ 11:28 PM
test / dev / hdb or / dev / hdc depending on where you connected the hard disk, if the ide 1 or 2 on the motherboard
LikeLike
Comment by fedelviejo — September 10, 2012 @ 3:52 AM
Zaib bhai, did you try to upgrade it to version 4.x? as i tried once last month but it give me some error that key pattern in 4.x is change etc…
If you tried it then please share with us..
thanks
LikeLike
Comment by Arbab — December 26, 2011 @ 1:26 AM
I guess it will not work with 4.x
because till ver 3.x , key was in 7 digits,
but from upwards, key changed into 8 key digit, so it may not work.
LikeLike
Comment by Pinochio~:) — December 26, 2011 @ 10:39 AM
zaib bhai i face a problem with cracking MT i successfully add file keygen.npk in mikrotik but when i do ssh with this ip 192.168.2.1 an error appear NO ROUTE FOR HOST…… What should i do now i newbie in mikrotik
LikeLike
Comment by Mobeen — January 6, 2012 @ 8:31 PM
What IP you have set on your mikrotik lan interface?
What ip you have set on the pc from where you are using ssh ?
both must be on same subnet.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — January 6, 2012 @ 8:53 PM
salam,
bhia i have problem in my ip address that time i write in ssh with my ip address 192.168.1.66 this my pc ip and my mikrotik ip is also 192.168.1.66 both r same but still massage written is connection refussed pls can u tell me bhia what can i do only problem this
all i do what u telling in your video but this is the problem here pls help me ass soon as possible
LikeLike
Comment by khalid khan — February 27, 2012 @ 2:09 AM
connection refuse error occurs when you haven’t uploaded the keygen or after up[loading, you haven’t rebooted the mikrotik.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — February 27, 2012 @ 8:34 AM
on MT 192.168.2.1 and on pc 192.168.2.1 defult gatway ……
LikeLike
Comment by Mobeen — January 7, 2012 @ 12:25 AM
Ether1 192.168.2.1 this is my builtin lan card ip and my exrta lan card ip is not assign yet……
LikeLike
Comment by Mobeen — January 7, 2012 @ 12:29 AM
are you able to ping mikrotik lan ip from your pc ? if not , check the networking setting of mikrotik and your pc. its ip related issue solve it at ur end.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — January 7, 2012 @ 10:38 AM
ping OK i changed my lan card preference ssh done..!
Now i’ve problem with roskey /dev/hda HU6I-XPT this commad when i enter this command : /dev/hdb: NO SUCH DEVICE AND ADDRESS
😦 Plz help
LikeLike
Comment by Mobeen — January 7, 2012 @ 4:12 PM
thanks god i finally completed my 5steps like ur post shows…. Now step 6 is not done bcoz when i import the key which i download from ur given link he said invalid key.. Coz in keygen folder the file with HU6I-XPT this name and my software id name is different my software id is VLHH and something plz help me out with this THANKS
LikeLike
Comment by Mobeen Ahmad — January 7, 2012 @ 10:20 PM
It means you haven’t completed the “SSH TO EXECUTE KEYGEN” process completely.
do it again untill you see “Work Fine !!!” and then re-check license key which must match to the key provided with keygen.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — January 8, 2012 @ 12:47 PM
Thanks for a great article, I will soon be installing again Insha Allah. but just to add my personal experience here… I tried this very same method few months back and it never worked. Then after completing the SSH step I switched of the router directly instead of rebooting and then the rest worked fine. because after every “reboot” mikrotik always showed the system generated key instead of the crakced key… Has any one else had the same problem.
LikeLike
Comment by Nabeel — January 10, 2012 @ 6:32 PM
You dont have to actually switch off the router, it can work without switching off or reboot.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — January 11, 2012 @ 10:37 AM
@nabeel
dont restart mikrotik/router after ssh… when he shows WORK FINE open winbox and import kegen its work fine with me 🙂 thanks 4 zaib bhai
LikeLike
Comment by Mobeen — January 11, 2012 @ 9:00 PM
thanks .. Actually as i mentioned… I tried this technique few months before. I saw it on youtube. but after every time when the router displays “work fine” message. I Rebooted from Winbox and after restart the key never worked.. and License was reset again to the one generated at installation. so i googled and found out that you are not supposed to restart.. but Switch it off directly.. then turn back on and then import license key.. and it worked .. So when i saw this blog post i instantly remember what i encountered and thought may be i should share here.. I have one now installed and cracked to level 6 🙂 it’s in testing phase ..4 WAN PCC method thanks to zaib bhai.. it will be in production environment soon Insha Allah.. JAZAKALLAH
LikeLike
Comment by Nabeel — January 12, 2012 @ 12:48 PM
sir would you like to tell us that if we forget the password how we can get it full control admin password please help me
LikeLike
Comment by ijaz — January 14, 2012 @ 12:29 AM
Read this article to recover mikrotik password.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — January 14, 2012 @ 10:43 AM
hello mr. zeib, just curious. is that work fine if i clone the hd after the crack proccess finished? can i clone that hd to another hd?
LikeLike
Comment by mbahsimak — January 18, 2012 @ 3:57 AM
I haven’t checked it with any DISK IMAGING application,
However Mikrotik officially states that if you use disk cloning , Key will lost.
Any how try it and let us know.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — January 18, 2012 @ 10:32 AM
that right mr. zaib, i just tried last night. at first the mikrotik didn’t boot. i tried to install grubb2 on it and success to booting system. but mikrotik said the key expired 🙂
LikeLike
Comment by mbahsimak — January 18, 2012 @ 11:42 AM
thx for you tutorial…
LikeLike
Comment by mbahsimak — January 18, 2012 @ 11:53 AM
can you tel me your cel num or any live ID, i want to talk you thank you sir g….
my.email obaid301@gmail.com i have some problum when i configure mikrotik… plz sir
LikeLike
Comment by obaid — February 1, 2012 @ 6:38 PM
Sorry no phone coversation is supported for general queries.
Email me your queries at aacable [at] hotmail.com
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — February 2, 2012 @ 10:42 AM
whats your e mail
LikeLike
Comment by obaid — February 2, 2012 @ 4:43 PM
helo sir… can you tel mew how we configure web proxy? plz sir tel me in detail thankx
LikeLike
Comment by obaid — February 2, 2012 @ 10:44 PM
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — February 2, 2012 @ 10:55 PM
thanks
LikeLike
Comment by obaid — February 3, 2012 @ 12:47 PM
sir i need your help regarding mikrotic. it works fine until i crack it. 404 error comes on hotspot
LikeLike
Comment by waqar — February 7, 2012 @ 9:50 PM
There is no relation between cracking and hotspot working.
First install mikrotik, crack it, then configure hotspot.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — February 7, 2012 @ 11:24 PM
i have windows 7 and on cmd promt under folder keygen when i m typing ssh 192.168.1.2 it says connection refused while i can ping the target machine and also can conect thrught putty on port 22 just getting refused when trying from win 7 commant prompt ssh 192.168.1.2 what is wrong i searched alot what is other way i can run roskey command if this wont connect through ssh what else i should do please reply thanks
LikeLike
Comment by Wes — February 8, 2012 @ 6:13 AM
This error comes when you don’t install keygen npk package properly.
First upload keygen to Mikrotik Files section (in main / folder)
then restart Mikrotik,
After rebooting, try to ssh, it will work.
Do let me know the status.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — February 8, 2012 @ 9:01 AM
i am trying to ssh from windows 7 command prompt to mikrotik server 3.30 to crack ssh says connection refused while i can connect via putty to target mikrotik server what is wrong with ssh from windows 7 please reply thanks
LikeLike
Comment by Wes — February 8, 2012 @ 6:21 AM
This error comes when you don’t install keygen npk package properly.
First upload keygen to Mikrotik Files section (in main / folder)
then restart Mikrotik,
After rebooting, try to ssh, it will work.
Do let me know the status.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — February 8, 2012 @ 8:59 AM
salam dear sir i checked and tried several times the exact key npk file i m using mikrotik 3.30 os but when i double clicked on npk key gen file the version f this file says 3.20 is this the problem ? i dont have correct keygen file? or where can i download mikrotik 3.30 os with working cracked or key gen ssh connection still refusing it kindly give me any link to download both mikrotik os with proper key gen files and license file i will very thankful to you. wait for your answer
LikeLike
Comment by Wes — February 8, 2012 @ 11:48 PM
Dear first you have to download 3.2 and crack it, then you will upgrade to 3.30
follow the article exactly and you will be able to go through correctly.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — February 9, 2012 @ 8:57 AM
Ok thanks my matter resolved i read above your post in detail and followed it thanks for nice post very helpful and genrous of u to share knowledge thanks and best regards
Wes
LikeLike
Comment by Wes — February 9, 2012 @ 3:14 AM
You are Welcome & I am glad it helped you.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — February 9, 2012 @ 8:55 AM
dear Syed Jahanzaib i sent you an email on hotmail i will appericiate if you read my email and reply Thanks
and best regards
Wes
LikeLike
Comment by Wes — February 10, 2012 @ 6:33 AM
I have replied you accordingly.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — February 10, 2012 @ 8:56 AM
I recommend you not block torrent, rather then blocking, Limit there speed
Blocking is not an good idea. people will always find a newer way, and you have constantly monitor there usage.
So its best if you limit there speed, or impose daily quota limit.
or create rule like this, for example if a user uses torrent, his ip automatically gets in “torrent_users_list” for 1 hour, and this address list should be speed limited.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — February 10, 2012 @ 9:10 AM
ok good so how can i create this rule for user who using torrent and his ip automatically gets in torrent_users_list for 1 hour and procedure to limitize the speed as well
i ll appericiate if you write complete method using winbox interface thanks waiting for your reply.
Regards
LikeLike
Comment by Wes — February 10, 2012 @ 9:46 AM
sorry bro, i recently joined new company, and its complex environment here, so quite busy in microsoft world now :S
just looking for another job now.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — February 10, 2012 @ 10:19 AM
ok i can understand so thats mean you wil write it later work hours or never 🙂 ?
LikeLike
Comment by Wes — February 10, 2012 @ 10:31 AM
When you get time after work hours please reply to this query ok good so how can i create this rule for user who using torrent and his ip automatically gets in torrent_users_list for 1 hour and procedure to limitize the speed as well
i ll appericiate if you write complete method using winbox interface thanks waiting for your reply.
LikeLike
Comment by Wes — February 10, 2012 @ 11:07 AM
i am still waiting sir
Regards
LikeLike
Comment by Wes — February 11, 2012 @ 7:19 AM
here is my mikrotik login and logout not workin..if i logout the timr is runing till will finished
LikeLike
Comment by tim dey — February 28, 2012 @ 7:35 PM
Just follow the guide step by step exactly.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — February 29, 2012 @ 12:04 PM
installed 2 months ago and successfully cracked! may we ask any other questions regarding mikrotik except cracking?
LikeLike
Comment by Asgher Ali Qambrani — March 6, 2012 @ 4:48 PM
Cracking / Usage of pirated software is not supported.
I wrote this guide for some education purpose only. So that people can test mikrotik before purchasing.
So no support for mikrotik cracking.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — March 7, 2012 @ 9:52 AM
Need mikrotik 4.10 roskey or SSTP nkp .Mikrotik 3.33 license key only 7digits but 4.0 to 6++ have 8digits key .if u have 8digits roskey then please mail me or your blog.my mail id tanvir07@gmail.com
LikeLike
Comment by tanvir — March 19, 2012 @ 7:34 PM
no support for mikrotik crack for illegal usage. buy the license , its cheap in price and the developer of mikrotik really deserve some money for there work 🙂
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — March 20, 2012 @ 2:17 PM
aoa jahanzaib bhai kia ap bata sakte hai usb ke throw internet kaise share kare ge ager mikrtoik server user ker rahe ho.
plz as soon as possible.
LikeLike
Comment by muhammad nauman — March 28, 2012 @ 12:50 PM
sir main nay hotspot server create kiya hua hai… main nay Server Profile main Login main sirf HTTP chap pr select kiya hua hai… Mere user cookies kay zariye khud he login ho jaatay hain. Main chahta hoon kay WO login page pr id pasword daal k enter hoon
Sir plzz is ka solution bata dain
LikeLike
Comment by Owais Malik — April 2, 2012 @ 8:27 PM
I have patched Mikrotik 3.60 on Dell 280 System, I am able to connect using built in NIC , but Mikrotik is showing all NICs as valid NIC but unable to connect on other NIC , need ur help
LikeLike
Comment by Mudassir Aftab — April 3, 2012 @ 11:45 PM
AOA, Jahanzaib bhai, I’m trying to ssh after installing keygen.npk but getting an Error: Connection Refused.
Read all the comments under this post. Using windows 7, Is there any Solution for this?
LikeLike
Comment by Danish Jamil — April 4, 2012 @ 11:29 PM
After uploading keygen npk to mikrotik files section, reboot your Mikrotik, then try to SSH
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — April 5, 2012 @ 8:53 AM
Asalam o alakum. zaib bhae. i have cracked MT 3.20 with Level 6 licence acording to the steps given and key works fine for 3.20. but when i upgrade it to MT 3.30, its again says key will expire in 24 hours. i used VMware workstation 7. and set VM guest OS and its version to “others”. did i missed something in VM creation? as i tried 2 – 3 times but same result. Help plz
LikeLike
Comment by Abdur Rehman — April 14, 2012 @ 4:58 PM
Using Mikrotik on VMWARE is not the issue. I myself always use it for testing various scenarios. I have not faced this issue. There must be some step you might be missing or doing wrong. Post all your steps in brief here so I can track where you are doing mistake.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — April 14, 2012 @ 7:44 PM
ok. the steps are
1. Install MT 3.20
2. set the IP 192.168.1.10, open winbox and copy “Keygen.npk”
3. ssh 192.168.1.10 and run “roskey /dev/hda NNFT-86N” (level 6 key)
4. when it say key works fine, i shutdown VM. start it again and key is change now i import the key
5. reboots it worked for 3.20
6. now i copy routeros x86-3.30.npk and reboot the VM
7. after reboot the licence dialog apear which shows “1234-5678” and gives 24 hour of expire time
i done it 2-3 times but same result
LikeLike
Comment by Abdur Rehman — April 14, 2012 @ 7:59 PM
Your step no 3 is incorrect.
The correct key is HU6I-XPT according to the manual.
Read the article again and again carefully.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — April 14, 2012 @ 8:04 PM
yes there is problem with key NNFT-86N (i used it)
but this key “NNFT-86N” is also a level 6 key
and 3.20 works fine with it
why upgrade does not work???
LikeLike
Comment by Abdur Rehman — April 14, 2012 @ 8:30 PM
Creak expire after 4-6 months ………. any solution …..????
LikeLike
Comment by smn4all — April 19, 2012 @ 9:21 AM
Below is the result when I tried to secure shell to the Mikrotik IP
———————————————————-
C:\> cd \keygen
C:\Keygen>ssh 192.168.2.1
connect: Connection refused
C:\Keygen>ssh 192.168.2.1
connect: Connection refused
LikeLike
Comment by Dipson — April 25, 2012 @ 7:10 AM
This only happens when you don’t upload KEYGEN.NP to Mikrotik FILES section. (in root folder)
After uploading, a Reboot is must. Reboot manually from mikrotik server console. You will see INSTALLING KEYGEN .NPK bar. I have updated the article as well with the image, Kindly go through with he tutorial again. Read it carefully.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — April 25, 2012 @ 10:50 AM
This licence doesnt allow superchannels ?.
LikeLike
Comment by Alfa — April 25, 2012 @ 9:48 PM
I guess not. but i m not sure as I never used this feature.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — April 26, 2012 @ 3:51 PM
Reblogged this on SHERY's BLOG ON COMPUTER NETWORKING/I.T TIPS.
LikeLike
Comment by Shery — May 19, 2012 @ 5:48 PM
i have been succesfully installed MT using the tutorial on my PC. However, I dont find the user manager package on the machine. can anyone help me how to install it>
LikeLike
Comment by aplikomstie — May 25, 2012 @ 6:42 PM
I just discovered that hotspot users time still reading even after logout. how will I stop it? please.
LikeLike
Comment by Greg — May 27, 2012 @ 9:07 PM
What user manager / mikrotik version you are using ?
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — May 28, 2012 @ 12:02 PM
I am using mikrotik version 3.20
LikeLike
Comment by greg — May 28, 2012 @ 9:18 PM
i have a seperate pc working as Mikrotik server with ide hard disk…..when i write “roskey /dev/hdb HU6I-XPT” a msg says : /dev/hdb: No such device or address…???!?!!!!
LikeLike
Comment by Leado — May 27, 2012 @ 9:36 PM
NOTE: Various harddisk have different code as below (Adjust it according to your harddisk chemistry)
hda= HD Virtual
hdb= HD IDE
sda= HD sata
There are other codes too, search google, also probably your hdd is not being detected by the ROS
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — May 28, 2012 @ 8:49 AM
i dont really know where to start if i want to connect through ssh to mikrotik. its command promt on PC or mikrotik and how?
LikeLike
Comment by blair mease — May 31, 2012 @ 11:57 AM
Just follow this guide, and you will lead to success 😉
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — June 4, 2012 @ 10:02 AM
i tried open commad promt and try to type keygen doesnt work
LikeLike
Comment by blair mease — May 31, 2012 @ 12:03 PM
hi Syed Jahanzaib,
I just discovered that hotspot users time still reading even after logout. how will I stop it? please.
I am using mikrotik version 3.20, because I upgrading it to ver.3.30 and I had problem with radius server, “” radius server not responding”” I re-installed the Userman-3.30 and the problem persist, I have to downgrade to 3.20 everything work fine, but the hotspot users time still reading even after logout form the hotspot interface.
LikeLike
Comment by Greg — June 5, 2012 @ 7:27 PM
i can’t import key. help me
LikeLike
Comment by dahlie — June 21, 2012 @ 11:41 AM
i have done it at step work fine ! but after it when try to import license key it gives error “invalid license key” ??
LikeLike
Comment by Ahmed — June 21, 2012 @ 7:25 PM
Please give me the ans. for above issue ” invalid license key?
LikeLike
Comment by Ahmed — June 22, 2012 @ 4:44 PM
guide is excellent, but rosskey is damn slow 😦
my pc rig is core i3 sandybridge
4gb ram
roskey takes almost 4 hours 😦
LikeLike
Comment by Zeeshan — June 24, 2012 @ 2:01 PM
1 more thing can i use 8digit key with roskey method or not ?
LikeLike
Comment by Zeeshan — June 24, 2012 @ 2:02 PM
Old ROS uses 7 Digi KEY.
New ROS uses 8 Digit KEY
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — June 27, 2012 @ 9:05 AM
thanks for tutorial on crack mikrotik
LikeLike
Comment by purnosidi — June 26, 2012 @ 6:22 AM
Reblogged this on PurnoSidi #blog and commented:
crack mikrotik 3.20
LikeLike
Comment by purnosidi — June 26, 2012 @ 6:23 AM
thx
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — June 27, 2012 @ 9:00 AM
how can block https different website in squid
LikeLike
Comment by kashif lari — July 4, 2012 @ 1:28 AM
Some one plz help i am installing cracked 3.2 microtik os when i am trying ssh 192.168.2.1 on command line it is showing connect : route or host, what should i do plz and plz help me out
LikeLike
Comment by Jaffar Saleem — July 11, 2012 @ 2:37 PM
provide more info. snapshot etc
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — July 12, 2012 @ 12:05 PM
assalamu’alaikum, Syed jahanzaib, i have download from : http://204.62.56.64/mikrotik/3.20/mikrotik-3.20.iso and then burning and install, this file unlimited, there is not limited until 24 hours, then still go on with your article, i follow step by step “Howto Crack Mikrotik 3.30 [P.C.C SUPPORTED VER] ” untiil 8 hour not finish. plz help me out
LikeLike
Comment by magelar — July 15, 2012 @ 7:42 AM
why i have a segmentation fault when i type: /dev/hda HU6I-XPT ?
LikeLike
Comment by rapper — July 16, 2012 @ 1:38 AM
ok problem solved I had a problems with my PC runnig MT. I reinstaled MT on another PC and problem disappear 🙂 sorry for my english 😉 I’m Polish
LikeLike
Comment by rapper — July 16, 2012 @ 2:13 AM
problem caused by broken hdd – solved: I reinstall mt on antoher full working hdd and I replaced RAM in PC wich I use for routing and any problems was solved. Again sorry for my english
LikeLike
Comment by rapper3d — August 21, 2012 @ 9:54 PM
great, finally you have manage to solve it 🙂
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — August 22, 2012 @ 9:34 AM
guys enjoy 5.18 cracked iso http://www.wi-net.com.ve/descargas/mikrotik/mikrotik-5.18.iso
not tested with clients but working.. key file in iso..
LikeLike
Comment by Zeeshan — July 16, 2012 @ 9:28 AM
I can confirm that this is working, The KEY is working and its Level 6.
Thanks Zeeshan 🙂
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — July 16, 2012 @ 11:49 AM
g sir yeh level 6 key hai maine vbox p install ker k dekha hai clients k sath nahe is liye maine kaha not tested 🙂
LikeLike
Comment by Zeeshan — July 16, 2012 @ 12:27 PM
Sir, asslam o alaikum sir me ne mikrotik 3.3 level 6 ko crack kiya he. Abi jab me ne oss me winbox se ip address enter kiye hein to ARP me osse lan aur wan ko show karna chiye lekin ni show ho rahe hein kiya waja ho sakti he
lan ip he 6.6.6.6/24
Aur wan 192.168.1.10/24
Dns name koi b ni diya he
Dns primry he 192.168.1.1
Sec he 0.0.0.0.0
Aur allow remot koun check he
gateway he 192.168.1.1 aus ping pe he plz me and send the email on my addres hamrisite@ yahoo.com
LikeLike
Comment by nasir — July 16, 2012 @ 4:43 PM
JAHANZAIB Sir, Salam,
Sir i have cracked my MT3.30 using via CD..Live method….
How to i connect my PC to MT Server and configure the wireless server in MT3.30.
please help me.. and post your personal Cell# though i contact you in any case of trouble.
Thanks….
FARHAN HAMEED, PIPLAN, MIANWALI 0331-7219092
LikeLike
Comment by Farhan Hameed — July 24, 2012 @ 8:48 AM
You can connect your pc to Mikrotik server using WINBOX tool. Its available at mikrotik site.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — July 25, 2012 @ 9:43 AM
But is it possible to use usermanager with this version ie. 3.30? and how do i download usermanager since i can’t find it anywhere on the mikrotik page..thanks
LikeLike
Comment by max — August 3, 2012 @ 6:24 PM
JAHANZAIB Sir, Salam
i have rb 433 ah v 3.xx i make it v 6 but loss the key … it give me 24 hour to stop ..how i can make it work again plz help me to not loss my r.b
even any software any level
thank u
LikeLike
Comment by alkhansanet — August 5, 2012 @ 8:23 PM
Contact Mikrotik support immediately. They will provide you with the solution/key.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — August 6, 2012 @ 9:02 AM
ssh connect: connection timed out .. Any suggestion for this error
LikeLike
Comment by Itx Marko — August 6, 2012 @ 6:27 AM
are you able to ping the mikrotik box from your management box?
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — August 6, 2012 @ 9:01 AM
i have to copy keygen.npk to files, and restart mikrotik too.
but that’s not show on package list.
and that the reason why the ” ssh ” refused connection.
and now what should i do sir ?
LikeLike
Comment by gedebag — August 13, 2012 @ 2:26 AM
dear sir, i have 1 6mb ptcl connection, & 4+4+4Mb, what are the 4 wan setting for Mikrotik 5.4 ver ? and 3.3 ver ?
kindly also mail me copy of Settings. I shall be very thanks for you…..,
adeel hafeez
LikeLike
Comment by adeelhafeez786 — September 18, 2012 @ 11:34 PM
dear sir, i have 1 6mb ptcl connection, & 4+4+4Mb, what are the 4 wan setting for Mikrotik 5.4 ver ? and 3.3 ver ?
kindly also mail me copy of Settings. I shall be very thanks for your kindness…..,
adeel hafeez
LikeLike
Comment by adeelhafeez786 — September 18, 2012 @ 11:35 PM
sir can i have videos of mikrotik in urdu,??? if u have plz upload them and share the link
LikeLike
Comment by Jawwad Hussain — September 24, 2012 @ 2:01 PM
I don’t have mikrotik videos, but there are lot of urdu video of mikrotik videos available at youtube, some of them are compiled using my guides,
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — September 28, 2012 @ 9:10 AM
Hello, and thanks a lot for the tutorial.
I have this problem. I’ve installed MikroTik routerOS 3.20 in a PC (Pentium IV 1,6Ghz, 512MB RAM, 4 PCI 3com ethernet cards, 512MB usb flash drive). The installation runs smoothly, in fact, it detects the Generic MASS STORAGE USB DRIVE as a SATA1 harddrive.
The actual problem is when I attempt to crack it. Not only it is veeeeery anoying, since takes about 3 hours to do the trick. The problem is that IT DOESN’T WORK. After doing
—> roskey /dev/sda HU6I-XPT
I get dhe message WORK FINE! But the license software ID doesn’t change, and I can’t import the cracked license.
I’ve done this procedure several times, also trying with other licences and mikrotik-3.20 isos. Always the same result.
What can be happening? Is it because of the usb flash drive? That would be a problem, because I don’t have any IDE/SATA harddrive to use on this.
It is important to mention one thing; when doing roskey, it doesn’t detect the harddrive features (Model, Fw, SerialNo); giving this on screen.
—> Model=, FwRev=, SerialNo=
Should I use another usb flash drive?
Thanks again.
LikeLike
Comment by Juan Jose Bora — October 3, 2012 @ 6:48 PM
Why you are still stucking withe the old 3.3x version.
ver 5.18 and 5.20 crack is out there. search google, it comes precracked, just import the key and thats it.
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — October 5, 2012 @ 8:21 AM
Hi, and thanks a lot for the answer. I first tried 5.18, but I’ve ended up with the same problem. After the installation, the softwareID is completely different from the cracked key provided. I’ve tried everything but no cigar. That’s when I figured out that a manual cracked version, such as 3.3x might work. I was wrong.
The funniest thing is that after spending three days struggling I’v given up and thought of pfSense. I’ve installed pfsense and I’m having a wide variety of problems as well.
I think is time to surrender and buy a propper RouterBoard with a legal license.
Thanks a lot though…
LikeLike
Comment by Juan Jose Bora — October 7, 2012 @ 8:12 PM
nowa days, Mikrotik 5.18 and 5.20 crack is available all over the internet. and there is no need to use crack on it. Simple importing the key (along with the pre cracked pacakge) is enough., instant registration 😀
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — October 9, 2012 @ 4:36 PM
But 5.18 or 5.20 cracked when installed doesn’t change the serial number in order to receive the license file. I have already tested, in both versions it works fine when installed in a Hard Disk Drive, but doesn´t work in USB Pendrives.
LikeLike
Comment by Rodrigo — December 3, 2012 @ 5:42 PM
you’re the one, my online teacher. thank u forever.
regard from bima indonesia.
LikeLike
Comment by abunadia29 — October 13, 2012 @ 5:25 PM
hello Sir
I install Mikrotik and its working but here is a problem. My device signals are Strong but net speed is too slow its show limited or no connectivity. I changed the access point but but the problem is same. I dont know what was the reason. please Sir help me what I do.. zaryabkhan5@gmail.com
LikeLike
Comment by muhammad atif — December 4, 2012 @ 11:40 PM
Its your Wireless issue ….. not a Mikrotik Problem …
LikeLike
Comment by smn4all — December 5, 2012 @ 9:07 PM
AOA. Good work sir i want to contact you but i haven’t understand you email id.
LikeLike
Comment by Khuram — January 7, 2013 @ 11:15 PM
its
aacable @ hotmail . com
(remove the spaces)
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — January 9, 2013 @ 8:43 AM
AoA.. Sir FIrst of all thanks for detailed discription over it in blog. Second i an having problem that when i installed Mikrotik, and when i goes to crack it i am unable to found any relavent file keygen.npk or anything, as i am unable to have proper crack. can u help me from whwere i can have it, or what should i do!! please respond ASAP.
LikeLike
Comment by Talha — February 3, 2013 @ 5:56 AM
hello everyone,
here no keygen file. may be some one delete this file that the link given.
so anybody give me this files
thanks
LikeLike
Comment by ony — February 16, 2013 @ 9:31 PM
i forget my winbox password what i can do
LikeLike
Comment by asif — April 13, 2013 @ 6:45 AM
You have x86 version of mikrotik or Routerboard?
LikeLike
Comment by Syed Jahanzaib / Pinochio~:) — April 13, 2013 @ 10:09 AM
i have problem in 5.18 and 5.20 that (found hard drive as ide primary master….) then hang process. please help me….
LikeLike
Comment by Jamal — February 16, 2014 @ 9:24 AM
Hi,
Nice site but how can I download mikrotic???
LikeLike
Comment by Omar — November 17, 2014 @ 1:50 AM
helloo master please help me crack mikrotik ver 6.33 iso
LikeLike
Comment by newsmaster — November 2, 2023 @ 6:16 AM